Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing the SFF universal media bay USB 3.2 Gen 1 port cable
Removing and replacing the SFF universal media bay USB 3.2 Gen 1 port cable
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-10 Torx screwdriver
T-15 Torx screwdriver
Procedure
Procedure
1. Back up all server data.
2. If installed, remove the front bezel .
3. If installed, remove all drives from the 2 SFF stacked drive cage.
4. Power down the server.
5. If installed, open the cable management arm.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
109