HPE ProLiant DL345 Gen11 Service And Maintenance Manual page 268

Item Item Description Description
1 Processor socket
2 Pin field cover cap
3 Processor carrier
4 Rail frame lift tabs
5 Retention frame screw (T-20)
6 Retention frame
7 Rail frame
8 Processor
Riser board components Riser board components
This server support two general types of PCIe risers:
Standard riser—This riser is a board-only riser that is directly installed on the riser connector on the system board. This riser type is
used:
As a standalone riser in a single-slot riser cage.
As the base riser in a three-slot riser cage.
Cabled riser—This riser type has its signal cable soldered on the board itself. This riser type is combined with a standard, base riser and
another cabled riser in a three-slot riser cage.
For clarity, the riser cage and the cables of the cabled risers are not shown in the following images.
Standard riser components Standard riser components
Item Description Item Description
1 Storage controller backup power connector
2 PCIe5 x16 (16, 8, 4, 1) slot
Cabled riser components Cabled riser components
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 268