Table of Contents
Advertisement
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Do one of the following:
a. Remove the air baffle .
b. Remove the midplane drive cage .
9. Disconnect the riser cable from the system board.
10. Remove the primary riser cage.
11. Remove the expansion card .
12. Remove the free-height riser and stacking riser from the riser cage.
Retain all screws for future use.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
147
Advertisement
Table of Contents
