HPE ProLiant DL345 Gen11 Service And Maintenance Manual page 98

Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the front 2 SFF stacked drive blank Removing and replacing the front 2 SFF stacked drive blank
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-10 Torx screwdriver
T-15 Torx screwdriver
Procedure Procedure
1. Back up all server data.
2. If installed, remove the front bezel .
3. Power down the server.
4. If installed, open the cable management arm.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 98