HPE ProLiant DL345 Gen11 Service And Maintenance Manual page 45

T-25 Torx screwdriver—This tool is required if the shipping screws located inside the chassis ears are secured.
About this task About this task
WARNING: WARNING:
To reduce the risk of personal injury, be careful when pressing the server rail-release latches. The inner rails could pinch
your fingers.
Procedure Procedure
1. If needed, loosen the shipping screws, and then use the chassis ear latches to slide the server out of the rack until the rail-release latches
are engaged.
2. WARNING: WARNING:
To reduce the risk of personal injury, be careful when pressing the server rail-release latches. The inner rails could pinch
your fingers.
Press and hold the rear-end rail-release latches (callout 1), and then slide the server out of the rack until it is fully extended (callout 2).
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 45