Table of Contents
Advertisement
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Do one of the following:
a. Remove the air baffle .
b. Remove the midplane drive cage .
9. To remove the energy pack from the holder, do the following:
a. Disconnect the cable (callout 1).
b. Press and hold the release latch (callout 2).
c. Lift one end of the energy pack and release it from the holder (callouts 3 and 4).
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
95
Advertisement
Table of Contents
