HPE ProLiant DL345 Gen11 Service And Maintenance Manual page 258

Item Item Description Description
1 Power On/Standby button and system
power LED
2 Health LED
3 NIC status LED
4 UID button/LED
1
When all LEDs flash simultaneously, a power fault has occurred. For more information, see Front panel LED power fault codes.
2
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the
front I/O cable is disconnected.
3
If the health LED indicates a degraded or critical state, review the system Integrated Management Log (IML) or use HPE iLO to review
the system health status.
Subtopics Subtopics
Server UID LED Server UID LED
Using the UID button to view the Server Health Summary Using the UID button to view the Server Health Summary
Front panel LED power fault codes Front panel LED power fault codes
Server UID LED Server UID LED
The UID LED is used to locate a particular server when it is deployed in a dense rack with other equipment. Activating the UID LED helps an
on-site technician to quickly identify a server for maintenance tasks.
1
1
1
1
Status Status Definition Definition
Solid green System on
Flashing green Performing power-on sequence
Solid amber System in standby
Off No power present
Solid green Normal
Flashing green iLO is rebooting
Flashing amber System degraded
Flashing red System critical
Solid green Linked to network
Flashing green Network active
Off No network activity
Solid blue Activated
Flashing blue
Off Deactivated
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
2
3
3
1 flash per second—Remote management
or firmware upgrade in progress
4 flashes per second—iLO manual reboot
sequence initiated
8 flashes per second—iLO manual reboot
sequence in progress
258