HPE ProLiant DL345 Gen11 Service And Maintenance Manual page 87

2. Extend the server from the rack .
3. Remove the access panel .
4. Remove the fan:
a. Press and hold the latch (callout 1).
b. Lift the fan from the fan cage (callout 2).
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing a cable guard Removing and replacing a cable guard
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure Procedure
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 87