Table of Contents
Advertisement
13. If installed, remove the following components:
Type-o storage controller
Chassis intrusion detection switch
Energy pack
OCP NIC 3.0 adapter
Serial port cable
14. Remove the following components:.
Energy pack holder
Cable guards
15. Allow all internal system components to cool before continuing.
16. Remove the heatsink:
CAUTION:
CAUTION:
To prevent mechanical damage or depositing oil on your hands or other contaminant to the heatsink contact surface,
hold the heatsink only by the edge of its base plate. Do not touch the heatsink fins.
a. Review the heatsink screw numbering on the heatsink label.
b. Loosen the heatsink screw numbers 6, 5, 4, and 3 in a diagonal manner (callouts 1 to 4).
Standard heatsink
Midplane cage heatsink
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
227
Advertisement
Table of Contents
