HPE ProLiant DL345 Gen11 Service And Maintenance Manual page 148

13. Detach the free-height riser and the stacking riser.
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the stacking riser Removing and replacing the stacking riser
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
T-10 Torx screwdriver
About this task About this task
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 148