Table of Contents
Advertisement
6. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
7. Disconnect all peripheral cables from the server.
8. Remove the server from the rack .
9. Place the server on a flat, level work surface.
10. Remove the access panel .
11. Remove the fan cage.
12. Remove the midwall bracket .
13. Disconnect all cables from the 2 SFF stacked drive backplane.
14. Remove the universal media bay:
a. Remove the universal media bay screws (callout 1).
b. Remove the universal media bay from the server (callout 2).
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
167
Advertisement
Table of Contents
