4. Do one of the following:
a. Install the air baffle.
b. Install the midplane drive cage.
5. Install the access panel.
6. Install the server into the rack.
7. Connect all peripheral cables to the server.
8. Connect each power cord to the server.
9. Connect each power cord to the power source.
10. Power up the server .
11. If removed, install the front bezel.
Processor replacement
Processor replacement
Subtopics
Subtopics
Processor cautions
Processor cautions
Removing the processor
Removing the processor
Installing the processor
Installing the processor
Processor cautions
Processor cautions
CAUTION: To avoid damage to the processor or system board, only authorized personnel should attempt to replace or
CAUTION:
install the processor in this server.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
210