Safety Considerations; Electrostatic Discharge - HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Table of Contents

Removing and replacing a DIMM

Heatsink replacement

Processor replacement

Removing and replacing an expansion card

Removing and replacing the energy pack

Removing and replacing the energy pack holder

Removing and replacing an M.2 SSD

Removing and replacing the iLO-M.2-serial module

M.2 SATA SSD replacement

HPE NS204i-p NVMe OS Boot Device replacement

Removing and replacing an internal USB device

Removing and replacing the front I/O assembly

Removing and replacing the front USB cable

Removing and replacing the serial port cable

Removing and replacing the serial port blank

Removing and replacing the iLO dedicated network port blank

Removing and replacing the power distribution board

System battery replacement

System board replacement

Safety considerations

Before performing service procedures, review all the safety information.

Subtopics

Symbols on equipment

Rack warnings and cautions

Server warnings and cautions

Electrostatic discharge

Be aware of the precautions you must follow when setting up the system or handling components. A discharge of static electricity from a

finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy

of the system or component.

To prevent electrostatic damage:

Avoid hand contact by transporting and storing products in static-safe containers.

HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide

Table of Contents