Table of Contents
Advertisement
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Remove the rear 4 LFF drive cage .
9. Disconnect any internal cables that are connected to the expansion card.
10. Remove the NS204i-u + secondary low-profile riser cage:
a. Release the half-turn spring latch (callouts 1 and 2).
b. Lift the riser cage off the system board (callout 3).
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
127
Advertisement
Table of Contents
