Table of Contents
Advertisement
10. If an expansion card with internal cables is installed on the riser, disconnect the cables from the card.
11. Remove the expansion card.
Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing a type-o storage controller
Removing and replacing a type-o storage controller
About this task
About this task
CAUTION:
CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION:
CAUTION:
The port blank provides EMI shielding and helps maintain proper thermal status inside the server. Do not operate the server
when a port blank is removed without the corresponding I/O port option installed.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
130
Advertisement
Table of Contents
