I/O Circuit Diagrams And Output Waveform - Panasonic SF4B-F31G(V2) Instruction Manual

2-5-2 I/O Circuit Diagrams and Output Waveform

<In case of using I/O circuit for PNP output>
Connector pin No.
Emitter
0.22μF
0.22μF
0.22μF
Internal circuit
Receiver
0.047μF
0.047μF
0.22μF
Internal circuit
*S1
Switch S1
● Emission halt input / Reset input
For manual reset: Vs to Vs - 2.5V (sink current 5mA or less) : Emission halt (Note 1), Open: Emission
For auto-reset: Vs to Vs - 2.5V (sink current 5mA or less) : Emission (Note 1), Open: Emission halt
● Interlock setting input, Override input, Muting input A / B, External device monitor input
Vs to Vs - 2.5V (sink current 5mA or less): Valid (Note 1), Open: Invalid
Notes: 1) Vs is the applying supply voltage.
2) The circuit diagram shown above is for 12-core cable to be used. For 8-core cable, red, yellow, gray,
gray / black, sky-blue / white, sky-blue / black, there is no lead wire.
<Reference>
K1, K2: External device (Forced guided relay or magnetic contactor)
28
Color code
(Brown) +V
(Red) Muting lamp output
(Yellow-green / Black) Auxiliary output
(Gray) Interference prevention +
(Gray / Black) Interference prevention -
(Yellow) Override input
470Ω
(Pale purple) Interlock setting input
470Ω
(Pink) Emission halt input / Reset input
470Ω
(Shield) Output polarity setting wire
(Blue) 0V
(Orange) Synchronization +
(Orange / black) Synchronization -
Users' circuit
(Orange / Black)
Synchronization -
(Orange) Synchronization +
(Brown) +V
(Gray) Interference prevention +
(Gray / Black) Interference prevention -
(Sky-blue / White) Muting input A
1kΩ
(Sky-blue / Black) Muting input B
1kΩ
(Yellow-green) External device monitor input
470Ω
(Black) Control output 1 (OSSD 1)
(White) Control output 2 (OSSD 2)
(Shield) Output polarity setting wire
(Blue) 0V
Users' circuit
*S1 *S1 *S1
*S1
*S1
K1
K2
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
+
24V DC
±10%
-
Load
K1
K2