Lifting The Drive - Danfoss VLT FC 103 Operating

VLT® Refrigeration Drive FC 103
Operating Guide
Table 42: Airflow Rates for E6h Enclosure
Cabinet Back-channel fan [m
PHF/line reactor 1285 (755)
Input options –
Drive 1053–1206 (620–710)
dU/dt 665 (392)
Sine-wave 2x900 (530)
Top entry/top exit –

4.9 Lifting the Drive

HEAVY WEIGHT
The drive is heavy. Failure to follow local safety regulations for lifting heavy weights may cause death, personal injury, or property
damage.
-
Ensure that the lifting equipment is in proper working condition.
-
Check the weight of the drive and verify that the lifting equipment can safely lift the weight.
-
Ensure that the angle from the top of the drive to the lifting cable is 65° or greater.
-
Test lift the drive approximately 610 mm (24 in) to verify the proper center of gravity lift point. Reposition the lifting point if
the unit is not level.
-
Never walk under suspended loads.
38 | Danfoss A/S © 2020.09
3
/hr (cfm)] Drive module top fan [m
–
–
629 (370)
–
–
–
W A R N I N G
Mechanical Installation
3
/hr (cfm)] Cabinet door fan [m
–
510 (310)
430 (255)
–
–
–
AQ357954340588en-000201 / 130R0881
3
/hr (cfm)]