Start Dialog - Quantum Scalar 1000 Operator's Manual

Start Dialog

5-114 Menus and Commands
Path: Main Menu Service Menu Start Dialog
Use the Start dialog to check and reset Preventative
Maintenance (PM) SAC codes. The dialog flow will be either
Start Dialog with No Errors or Start Dialog with Errors
(displays the last SAC Code). See Figure 5-156.
PM Due: 01/01/98
X Remain: 00500000
Y Remain: 000500000
Reset PM values?
Figure 5-156 Preventive Maintenance Due Dialog
Parameter
PM Due
X Remain
Y Remain
Reset PM values
If Y is selected for the Reset PM values parameter value,
the Confirm Change Dialog is displayed. See
Figure 5-157.
If N is selected, the Preventative Maintenance Due
dialog continues to display but no action is taken.
Confirm change?
Figure 5-157 Confirm Change Dialog
N<
Value
Date preventative
maintenance is due
Distance remaining on the
X-direction until PM
Distance remaining on the
Y-distance until PM
Y to reset PM values
N to keep PM values
N<
6-00054-02 Rev A