Mode Dialog - Quantum Scalar 1000 Operator's Manual

Mode Dialog

Note
If Shutdown is
selected for the
Mode parameter,
Shutdown is
automatically
displayed for the
State parameter.
5-10 Menus and Commands
Path: Main Menu
Use the Mode Dialog to change the library operating mode.
For example, you can set the library to Online or Offline.
See Figure 5-3.
Offline .......
>Online
Ready
Figure 5-3

Mode Dialog

Parameter
Mode
State
Accept
When toggling between the Ready and Not Ready states,
the following two screens, refer to Figure 5-4 and
Figure 5-5 appear. When Shutdown is selected, the
Shutdown Screen appears. See Figure 5-6.
Changing state to:
>READY<
Figure 5-4 Ready Screen
Changing state to:
>NOT READY<
Figure 5-5 Not Ready Screen
Mode Dialog
Ready
Accept: N
Value
Online
Offline
Shutdown
Ready
Not Ready
Y to accept changes
N to reject changes
6-00054-02 Rev A