Sac Dialog; Demo Dialog; Figure 5-206 Demo Dialog - Quantum Scalar 1000 Operator's Manual

SAC Dialog

Demo Dialog

Note
At least one storage
element for each
media type must
be empty for the
Demo option to
run.
22 June 2004
Path: Main Menu Service Menu SAC Dialog
Use the SAC Dialog to see an explanation of the
displayed Service Action Code. See Figure 5-204.
Enter SAC to lookup:
SAC: E1
I/E station door is
not closed
Figure 5-204

SAC Dialog

For additional information on the SAC codes, refer
to Service Action Codes on page 7-3.
Path: Main Menu Service Menu Demo Dialog
Use the Demo Dialog to move cartridges from storage
element-to-storage element, but not to the tape drives. You
must enter the correct password to use this dialog.
See Figure 5-205 and Figure 5-206.
Enter password:
[0000]
^
Figure 5-205 Password Dialog
For demo, all media
will be moved.
Cycles to Run: 009<
Accept: N
Figure 5-206

Demo Dialog

Parameter
Cycles to Run
Accept
Accept: N
Value
Indicates the desired cycle
count (001–020).
Y to accept changes
N to reject changes
Service Menu 5-143