Note
If the BC mask
selects more than
one cleaning tape,
the current and
maximum usage
parameter values
are applied to each
cleaning tape.
22 June 2004
BC
Continue
If Y is selected for the Continue parameter value, the
Usage Dialog appears. Refer to Figure 5-125. Otherwise,
the changed parameters continue to display but no action
is taken.
Type:
Current Use:
Maximum Use:
Figure 5-125
Usage Dialog
Parameter
Type:
Current Usage
Indicates the barcode mask of
the cleaning cartridge(s).
Searches the database for
cartridges that match the mask
you provide, and marks them
as cleaning cartridges.
You must select a barcode
mask that matches only
cleaning cartridges. If the
barcode mask matches other
than the cleaning cartridges,
later cleaning operations will
fail.
Y to accept changes
N to reject changes
LTO
000<
050
Accept: N
Value
Type of cleaning cartridge.
Listed below are media
domain and types:
Domain Type
Half
3480/90E
IBM 3590
Plasmon NCTP
DLT
DLT
SDLT
8 mm
AIT
LTO
IBM LTO
Specifies the number of times
the cleaning cartridge has been
used (000–511).
Setup Menu
5-95