5-122 Menus and Commands
Get/Put Storage Dialog
Path: Main Menu Service Menu Diags
Submenu Gripper Submenu Get/Put Storage
Dialog
Use the Get/Put Storage Dialog to start Get and Put of
all cartridges in a specified range. No element-to-element
movements take place. See Figure 5-168.
The gripper test will
get/put media
Cycles to run:
Figure 5-168
Get/Put Storage Dialog
Parameter
Cycles to run
[more]
When [more] is selected, the Continuation Screen
appears. See Figure 5-169.
Enter SOURCE
Coord: S 01< 2 A 01
OR Element: 00000
Accept: N
Figure 5-169
Continuation Dialog
Parameter
Coord
009<
[more]
Value
Indicates the number of cycles
to run (1–999)
More selections on the
Continuation Menu
Value
The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell).
The second field displays
module numbers that can be
modified if EMs are present
(1–4).
6-00054-02 Rev A