22 June 2004
Insert Clean Tape Dialog
Path: Main Menu
Insert Clean Tape Dialog
Use the Insert Clean Tape Dialog to move the selected
cleaning cartridge from the Insert/Eject station to the
designated empty storage cells. See Figure 5-63 on page 5-48.
If a Move Media is attempted without an inventory, the
following screen appears. See Figure 5-61.
-=> WARNING <=-
The library may not
be inventoried.
Figure 5-61
Parameter
Continue
If Y is selected for the Continue parameter, the Warning
message is removed.
If the Partitioned flag is set, the following screen appears.
See Figure 5-62.
-=> WARNING <=-
Moving tapes may
corrupt partitions.
Figure 5-62
Parameter
Continue
If Y is selected for the Continue parameter, the Warning
message is removed.
Commands Menu Insert/Eject
Continue : N
Warning Dialog
Value
Y to continue
N to return to the previous
menu
Continue : N
Warning Dialog
Value
Y to continue
N to return to the previous
menu
Commands Menu
5-47