Figure 5-140 Update Microcode Dialog - Quantum Scalar 1000 Operator's Manual

22 June 2004
Enter SOURCE
Coord: I 01 1< A 12
OR Element: 01193
Accept : N
Figure 5-140 Update Microcode Dialog
Parameter
Coord
Element
Accept
If Y is selected for the Accept parameter value, the
Element Dialog appears. See Figure 5-141. Otherwise,
the changed actions continue to display but no action is
taken.
Value
The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell).
The second field displays
module numbers that can be
modified if EMs are present (1–
4).
The third field indicates the
storage cell section (1–4), drive
bay (1–2), or IE station number.
The fourth field indicates the
column of the section (A–E),
drive port (A–B), or IE station
column.
The fifth field indicates the row
of the column.
(01–12 for ½-inch and SDLT/
DLT coordinates)
(01–14 for LTO coordinates)
(01–18 for AIT coordinates)
Displays the element number
that corresponds to the
coordinate parameter.
Y to accept changes
N to reject changes
Utils Menu 5-105