Quantum Scalar 1000 Operator's Manual page 220

Note
If the operation
stops, the Cancel
parameter no
longer displays.
5-144 Menus and Commands
If Y is selected for the Accept parameter, the Include
Drives Dialog appears. See Figure 5-207. Otherwise, the
changed parameters continue to display but no action is
taken.
Include drives: Y
Figure 5-207 Include Drives Dialog
Parameter
Include Drives
Accept
If Y is selected for the Accept parameter value, the
Response Dialog appears. See Figure 5-208. Otherwise,
the changed parameters continue to display but no action
is taken.
Demo with Drives
Cycle :5 of 9
Status:Running
Figure 5-208 Response Dialog
Parameter
Cycle
Status
Cancel
Accept: Y
Value
Y indicates that the drives will
be included in the cycling of
the cartridges.
N indicates that the drives will
not be included in the cycling
of the cartridges.
Y to accept the changes
N to reject the changes
Cancel: N<
Value
Indicates the number of
completed test cycles of the
requested cycles.
Shows the status of the
indicated cycle (Running,
Completed, Error, Canceled).
Y to cancel the test
N to continue running the test
6-00054-02 Rev A