Move Media Dialog; Figure 5-46 Move Media Dialog - Quantum Scalar 1000 Operator's Manual

22 June 2004

Move Media Dialog

Path: Main Menu
Submenu Move Media Dialog
Use the Move Media Dialog to move cartridges between
elements without host intervention. See Figure 5-46.
Enter SOURCE
Coord: S< 02 1 A 01
OR Element: 00000
Figure 5-46
Parameter
Coord
Element
Accept
Commands Menu Move
Accept : N

Move Media Dialog

Value
The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell).
The second field displays
module numbers that can be
modified if EMs are present (1–
4).
The third field indicates the
storage cell section (1–4), drive
bay (1–2), or IE station number.
The fourth field indicates the
column of the section (A–E),
drive port (A–B), or IE station
column.
The fifth field indicates the row
of the column.
(01–12 for ½-inch and SDLT/
DLT coordinates)
(01–14 for LTO coordinates)
(01–18 for AIT coordinates)
Displays the element number
that corresponds to the
coordinate parameter.
Y to accept changes
N to reject changes
Commands Menu 5-39