Element Address; Mixed-Media Support - Quantum Scalar 1000 Operator's Manual

22 June 2004

Element Address

Use Element Address to check current, default, or saved
addresses of the Accessor, storage cell, I/E station, or tape
drives. See Figure 5-11.
Base MT : 00001
Base ST : 04096
Base IE : 00016
Base DT : 00256
Figure 5-11 Element Address Screen
Parameter
Base MT
Base ST
Base IE
Base DT

Mixed-Media Support

Use Mixed-Media Support to see barcode processing or if
the read element, unique additional sense code qualifier, or
mixed mode is enabled.
When Mixed-Media Support is selected, the Mixed-Media
screen appears. See Figure 5-12.
MediaID :N
Ext RES :
Ext ASCQ :
Ext BC :
Figure 5-12 Mixed-Media Screen
Value
Current, default, or saved base
Accessor address
Current, default, or saved base
Storage Cell address
Current, default, or saved base
Insert/Eject station address
Current, default, or saved base
tape drive address
Mixed: N
N
N
N
Status Menu 5-15