Media Dialog - Quantum Scalar 1000 Operator's Manual

Note
If the value of the
Volser parameter
is changed, an
inventory is
required.
5-84 Menus and Commands

Media Dialog

Path: Main Menu Setup Menu Library
Submenu Media Dialog
Use the Media Dialog to control the settings for media
handling and reporting. The host software must support
mixed-media types if the library is operating in mixed mode.
See Figure 5-114.
For additional information, refer to the Scalar 1000 SCSI
Reference Manual.
Volser:
Add ID: Y
Extend: Y
Figure 5-114
Parameter
Volser
Media ID<
Mixed: Y
ASCQ Y
Accept: N

Media Dialog

Value
MEDIA ID
Media Identifier support is
enabled. The library shall scan
barcode media identifiers.
This mode requires the use of
six- character barcodes with
one or two-character media
identifiers.
DEFAULT indicates that the
library supports six character
barcode labels, or media ID
mode labels that have an
additional seventh or eighth
media ID character. The
barcode is stored and reported
as a six-character barcode
(ignoring any media IDs).
EXTENDED indicates that
the library supports 5 to
16-character barcode labels,
which may indicate any
mixed-media IDs and/or
checksums.
6-00054-02 Rev A