Changing The Password - Quantum Scalar 1000 Operator's Manual

5-82 Menus and Commands

Changing the Password

Parameter
Security
Password
Accept
If Y is selected for the Accept parameter and the change
password parameter is enabled, the Change Password
Dialog appears. Otherwise, the changed parameters
continue to display but no action is taken.
Change Password
Old[0000] New[0000]
^
Figure 5-111 Change Password
Parameter
Old
New
Accept
Value
If the Security is to be changed,
refer to Switching Security From
Off to On on page 5-79 or
Switching Security From On to
Off on page 5-81.
Y to change LCD password
N to leave the LCD password
as it is
Y to accept changes
N to reject changes
Accept: N
Value
Indicates the password to be
changed (0000–9999).
Indicates what the password
will be changed to
(0000–9999).
Y to accept changes
N to reject changes
6-00054-02 Rev A