5-128 Menus and Commands
Step Dialog
Path: Main Menu Service Menu Diags
Submenu Gripper Submenu Step Dialog
Use Step to set low-level control of Gripper functions. The
function should be used by trained service personnel.
See Figure 5-176.
This test should be
used by trained
personnel ONLY!
Continue: N<
Figure 5-176
Step Dialog
Parameter
Continue
If Y is selected for the Continue parameter value, the
Response Screen appears. See Figure 5-177.
Media
None<
Grip:
OPEN
Reach:
RETRACTED
Speed:
NORMAL
Figure 5-177
Continuation Dialog
Parameter
Media
Value
Y to continue the test
N to cancel the test
Value
LTO limits open/close range
for an LTO tape cartridge.
AIT limits open/close range
for an AIT tape cartridge.
DLT IIIXT limits open/close
range for a CompacTape IIIXT
tape cartridge.
DLT IV limits open/close
range for a CompacTape IV
tape cartridge.
DLT III limits open/close
6-00054-02 Rev A