Figure 5-84 Eject Clean Tape By Volser Screen; Figure 5-85 Response Screen - Quantum Scalar 1000 Operator's Manual

22 June 2004
Index
Eject
If Y is selected for the Accept parameter value, the Clean
Media Eject Screen appears. Otherwise, the changed
actions continue to display but no action is taken.
See Figure 5-84.
Eject in progress
Source : 00000
Target : 00788
Figure 5-84 Eject Clean Tape By VOLSER Screen
The cartridge is ejected to the first available empty cell in
the Insert/Eject station. The Response Screen appears.
See Figure 5-85.
Requested command is
now complete.
Figure 5-85 Response Screen
N/A There are no Insert/Eject
cells available. The operator
must remove a magazine of
another type of media from the
Insert/Eject station. Insert an
empty magazine of the correct
media type to eject this
cleaning cartridge.
Shows the current database
index (1 - 128)
Y Eject this cleaning cartridge
N Do not eject this cleaning
cartridge
- The operator cannot eject this
media because the IE station is
full, no magazine of the correct
media type is installed in the IE
Station, or a cleaning operation
is in progress.
Commands Menu 5-61