Insert/Eject Submenu; Insert Screen; Figure 5-56 Insert/Eject Submenu - Quantum Scalar 1000 Operator's Manual

Insert/Eject Submenu

Note
Use this option to
insert or eject
cartridge(s)
without host
intervention.
22 June 2004
Path: Main Menu Commands Menu Insert/Eject
Submenu
Use the Insert/Eject Submenu to insert or eject a clean
tape into or out of the library. See Figure 5-56.
> Insert
Insert Clean Tape...
Eject ...
Eject Clean Tape
Figure 5-56
Depending on your selection, you have the following options:
•

Insert Screen

• Insert Clean Tape Dialog on page 5-47
• Eject Dialog on page 5-52
• Eject Clean Tape Submenu on page 5-55

Insert Screen

Path: Main Menu Commands Menu Insert/Eject
Insert Screen
Use Insert Screen to move all cartridges found in the
Insert/Eject stations to the first available empty storage cells.
See Figure 5-57. If there are cartridges in the Insert/Eject
station, the response screen appears. See Figure 5-57.
Insert in progress
Source: 1182
Target: 0000
Figure 5-57
The Current Source and Target elements are updated.
See Figure 5-58 on page 5-46.

Insert/Eject Submenu

Insert Screen
Commands Menu 5-45