Note
Use the up or
down arrows to
change Amount
(step size) or
move gripper.
22 June 2004
Step Dialog
Path: Main Menu Service Menu Diags
Submenu Accessor Submenu Step Dialog
Use the Step Dialog to set Gripper low level control. This
function should only be used by trained service personnel.
See Figure 5-185.
This test should be
used by trained
personnel ONLY!
Continue: N<
Figure 5-185
Step Dialog
Parameter
Continue
If Y is selected for the Continue parameter value, the
Movement Dialog appears. See Figure 5-186.
Use Arrows to Move
X axis : 0539.0mm<
Y axis : 0000.0mm
Amount : 001.0mm
Figure 5-186
Movement Dialog
Parameter
X axis
Y axis
Amount
Value
Y to continue the test
N to cancel the test
Value
Displays X axis location.
Displays Y axis location.
Indicates move step distance
(1, 10–100 mm).
Press this button to select X, Y,
or Amount.
Service Menu 5-135