Figure 5-47 Target Dialog - Quantum Scalar 1000 Operator's Manual

5-40 Menus and Commands
If Y is selected for the Accept parameter value, the Target
Menu appears. See Figure 5-47. Otherwise, the changed
parameters continue to display but no action is taken.
Enter TARGET
Coord: I< 01 1 A 01
OR Element: 01182
Accept : N
Figure 5-47 Target Dialog
Parameter
Coord
Element
Accept
Value
The first field displays the type
of cell (I for I/E Station, D for
Drive, S for Storage cell).
The second field displays
module numbers that can be
modified if EMs are present
(1–4).
The third field displays the
storage cell section (1–4), drive
bay (1–2), or IE station
number.
The fourth field displays the
column of the section (A–E),
drive port (A–B), or IE station
column
The fifth field displays the row
of the column.
(01–12 for ½-inch and
SDLT/DLT coordinates)
(01–14 for LTO coordinates)
(01–18 for AIT coordinates)
Displays the element number
that corresponds to the
coordinate parameter
Y to accept changes
N to reject changes
6-00054-02 Rev A