Start-Up Problems; Hardware Problems; Table 23 Start-Up Problems; Table 24 Hardware Problems - Quantum DXi4500 User Manual

Start-up Problems

Table 23 Start-up Problems

Hardware Problems

Table 24 Hardware Problems

Quantum DXi4500 User's Guide
Table 23 describes problems that can occur during system start-up.
Problem
FATAL ERROR Unable
to start SNFS!
Message displays.
FATAL ERROR Unable
to start blockpool!
Message displays.
Table 24 describes corrective actions for problems occurring with the
system hardware.
Problem
The system does not
power on.
One power supply is
not functioning.
Chapter 10: Troubleshooting
Common Problems and Solutions
Corrective Action
Contact your Quantum Customer Support
representative (see Getting More
Information or Help
Contact your Quantum Customer Support
representative (see Getting More
Information or Help
Corrective Action
Make sure the power cords are connected
to a grounded electrical outlet and the
power switches located on the back of the
power supplies are on. If the problem
persists, contact your Quantum Customer
Support representative to arrange for
service (see Getting More Information or
Help on page xx).
Determine which power supply has failed by
observing the red fault LED on the power
supply. Contact your Quantum Customer
Support representative to arrange for
service (see Getting More Information or
Help on page xx).
on page xx).
on page xx).
171