Note
If the operation
stops, the Cancel
parameter no
longer displays.
5-124 Menus and Commands
If Y is selected for the Accept parameter value, the
Response Dialog appears. See Figure 5-171 on page
5-124. Otherwise, the changed parameters continue to
display but no action is taken.
DIAGS GRIPPER TEST
Cycle :
006 of 009
Status:
Running
Cancel: N<
Figure 5-171
Response Dialog
Parameter
Cycle
Status
Cancel
If Y is selected for the Cancel parameter value, the test is
cancelled. Otherwise, the test continues.
Value
The number of completed test
cycles of the requested cycles.
Shows the status of the
indicated cycle (Running,
Completed, Error, Canceled).
Y to cancel the test
N to continue running the test
6-00054-02 Rev A