Unload Drives Dialog - Quantum Scalar 1000 Operator's Manual

5-110 Menus and Commands

Unload Drives Dialog

Path: Main Menu Utils Menu Drives
Submenu Unload Drives Dialog
Use the Unload Drives dialog to eject a tape from the
specified drive. See Figure 5-147.
Enter SOURCE
Coord: D 01< 1 A 01
OR Element: 01200
Figure 5-147
Parameter
Coord
Element
Accept
Accept: N

Unload Drives Dialog

Value
The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell).
The second field displays
module numbers that can be
modified if EMs are present
(1–4).
The third field indicates the
storage cell section (1–4), drive
bay (1–2), or IE station
number.
The fourth field indicates the
column of the section (A–E),
drive port (A–B), or IE station
column.
The fifth field indicates the
row of the column.
(01–12 for ½-inch and SDLT/
DLT coordinates)
(01–14 for LTO coordinates)
(01–18 for AIT coordinates)
Displays the element number
that corresponds to the
coordinate parameter.
Y to accept changes
N to reject changes
6-00054-02 Rev A