Locks Dialog; Gripper Submenu - Quantum Scalar 1000 Operator's Manual

22 June 2004

Locks Dialog

Path: Main Menu Service Menu Diags
Submenu DI/DO Submenu
Use the Locks Dialog to exercise the I/E station lock
without opening and closing the station. See Figure 5-166.
If media removal has been prevented by the host, the
I/E station should not be unlocked by this method.
Pressing Enter will
toggle the lock.
State : Unlocked
Figure 5-166
Parameter
State

Gripper Submenu

Path: Main Menu Service Menu Diags
Submenu Gripper Submenu
Use the Gripper Submenu to select Get/Put actions for
storage or a drive. See Figure 5-167.
> Get/Put Storage
Get/Put Drives
...
Step
Figure 5-167
Depending on your selection, you have the following options:
• Get/Put Storage Dialog on page 5-122
• Get/Put Drives Dialog on page 5-125
• Step Dialog on page 5-128

Locks Dialog

Locks Dialog
Value
Locked indicates that the
Insert/Eject station is locked.
Unlocked indicates that the
Insert/Eject station is
unlocked.
...
...

Gripper Submenu

Service Menu 5-121