Park
Move Submenu
Note
The Scalar 1000
must be Offline
and Ready to use
the commands
under the Move
Menu.
5-36
Menus and Commands
Path: Main Menu Commands Menu Park
Use Park to retract the gripper and return the Accessor to the
home position. The two Response Screens appear.
See Figure 5-40 and Figure 5-41.
Requested command is
now in progress ...
Figure 5-40
Response Screen
Requested command is
now complete.
Figure 5-41
Response Screen
Path: Main Menu Commands Menu Move Submenu
Use the Move Submenu to position the gripper or scanner, or
to move media. See Figure 5-42.
>Position to Elem
Move Media
...
Figure 5-42
Move Submenu
Depending on your selection, you have the following options:
•
Position to Elem Dialog on page 5-37
•
Move Media Dialog on page 5-39
...
6-00054-02 Rev A