Quantum Scalar 1000 Operator's Manual page 161

Note
If Media ID is NOT
selected, Add ID,
Extend, and ASCQ
will be set to N.
Note
A Teach New defaults
to Mixed=Y when
more than one media
domain is found in the
library.
Auto-Teach will not
change this value
unless a configuration
change has been made,
and the library
performs a new teach.
22 June 2004
Add ID Y indicates that the media
identifier is added to the front
of the barcode label for RES
and RVEA.
N indicates that the media
identifier is NOT added to the
front of the barcode label for
RES and RVEA.
Extend Y indicates that extended
(Extend_RES) element
descriptor status is enabled.
N indicates that extended
element descriptor status is
disabled.
Mixed When mixed-media is enabled,
the library presents all possible
I/E cell positions. Depending
on the magazine, some may be
presented as uninstalled
through SCSI, RES and RVEA.
For additional information, see
SCSI Element Addressing
(document 400122).
Y- mixed-media is enabled and
presents I/E gaps
N - collapses I/E gaps
ASCQ Y - use vendor ASC/ASCQs
N - use standard SCSI-2 ASC/
ASCQs
Accept Y - to accept changes
N - to reject changes
If Y is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.
Setup Menu 5-85