22 June 2004
Parity Dialog
Path: Main Menu Setup Menu Library
Submenu SCSI Submenu
Use the Parity Dialog to set the SCSI bus parity.
Changes will not take effect until library power is cycled.
See Figure 5-102.
Parity
Retries
Figure 5-102
Parity Dialog
Parameter
Parity Next
Parity Now
Retries Next
Retries Now
Accept
If Y is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.
Parity Dialog
Next
Now
Yes<
Yes
001
001
Accept: N
Value
YES to enable SCSI parity
NO to disable SCSI parity
If parity is disabled, the retries
parameter is ignored.
Sets the number of retries
(000–255) allowed when a SCSI
parity error is detected.
Displays the current number of
retries (000–255) allowed when
a SCSI parity error is detected.
Y to accept changes
N to reject changes
Setup Menu
5-75