Media Dialog - Quantum Scalar 1000 Operator's Manual

Note
If Immediate cleaning
is selected, no time
values can be entered.
5-94 Menus and Commands
Schedule
Hours
Min
Accept
If Y is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.

Media Dialog

Path: Main Menu Setup Menu Cleaning
Submenu Media Dialog
Use the Media Dialog to specify the barcode number to
choose a cleaning tape of a specific media in the library.
See Figure 5-124.
A barcode mask is a valid, partial barcode label that can be
followed by a wildcard character (*). Barcode labels that
match the mask are marked as cleaning tapes. The barcode
mask must not match more than a maximum of 127 cleaning
tapes.
MediaType:
BC : AAAAAA
^
Figure 5-124
Parameter
Media Type
Immediate to allow drive
cleaning when requested by
the drive.
Delayed to schedule drive
cleaning for requesting drives
at the specified time.
Hour (00–23) that cleaning
should start.
Minute (0–59) that cleaning
should start.
Y to accept changes
N to reject changes
LTO
Continue: N

Media Dialog

Value
Selects one of the following
medium types:
3480/90E, 3590, NCTP,
DLT, SDLT, AIT, and IBM
LTO
6-00054-02 Rev A