Reservations Dialog - Quantum Scalar 1000 Operator's Manual

22 June 2004

Reservations Dialog

Path: Main Menu Status Menu Library
Submenu SCSI Submenu
Use the Reservations Dialog to view a specific element,
or the entire library. See Figure 5-15.
This reservation remains in effect until:
• The initiator that made the reservation sends another
command with the same Reservation Identification
number (this supersedes any previous reservation).
• The initiator that made the reservation sends a RELEASE
command.
A reset or a power-on of the library is performed.
Bus : 0 < Host ID : 0
Reservation ID:
Found : 0000
Figure 5-15 Reservation Dialog
Parameter
Bus
Host ID
Reservation ID
Found
Accept
If Y is selected for the Accept parameter value, the
Response Dialog appears. See Figure 5-16 on page 5-20.
Otherwise, the changed parameters continue to display
but no action is taken.

Reservations Dialog

Any
Accept: N
Value
Displays the SCSI Bus ID
number (0–1)
Displays the Host ID number
(0–7)
Displays the host's reservation
identifier (0x00–0xFF, Any)
The value of the Found
parameter in the Reservation
Dialog is supplied by the
library firmware and cannot be
changed.
Y to accept changes
N to reject changes
Status Menu 5-19