Safety Considerations; Disposal; Work Environment - Stratasys Objet30 User Manual

Safety
Considerations

Disposal

Work Environment

DOC-24333 Rev. A
Before being cured, resins are hazardous materials. To prevent possible
health hazards, follow these precautions regarding printing materials:
•
Do not expose to flames, heat or sparks.
•
Prevent contact with skin and eyes.
•
Ventilate areas where they are handled.
•
Keep them separate from food and drink.
Cured plastic parts, however, are safe. They can be handled and stored
without precautions.
You can find more safety information about resins in "Safety Guidelines" on
page 2-9, and "First Aid for Working with Printing Materials" on page 2-13.
Dispose of cartridges of model and support material in accordance with all
applicable laws and regulations. If necessary, the cartridges can be
disassembled for recycling.
Extreme heat and humidity conditions can adversely affect the operation of
the Objet 3D printer. Therefore, it is recommended that you use ventilation
or air‐conditioning systems, if necessary, to keep the work area within the
following ranges:
•
18°–25° C (64°–77° F)
•
30%–70% relative humidity
Objet30 User Guide
3–7