Safety Considerations; Disposal; Work Environment; Workstation Requirements - Stratasys J850 User Manual

Stratasys J850/J835 User Guide
mercury-vapor lights. Exposure to UV radiation causes an increase in viscosity
and, eventually, solidification.

Safety Considerations

Before being cured, resins are hazardous materials. To prevent possible
health hazards, follow these precautions regarding printing materials:
• Do not expose to flames, heat or sparks.
• Prevent contact with skin and eyes.
• Ventilate areas where they are handled.
• Keep them separate from food and drink.
Cured plastic parts, however, are safe. They can be handled and stored
without precautions.
You can find more safety information about resins in:
l
l

Disposal

Dispose of cartridges of model and support material in accordance with all
applicable laws and regulations.

Work Environment

Extreme heat and humidity conditions can adversely affect the operation of
your J850/J835 3D printer. Use ventilation or air-conditioning systems, if
necessary, to keep the work area within the following ranges:
• 18°–25° C (64°–77° F)
• 30%–70% relative humidity

Workstation Requirements

GrabCAD Print is an application for preparing and managing print jobs on
Stratasys J850/J835 printers (and on other supported 3D printers).
• To download GrabCAD Print, go to: help.grabcad.com/print/sign-up.
• To see the requirements for client computers running GrabCAD Print, go to:
DOC-18001 Rev. H
"Safety Guidelines" on page 2-5
"First Aid for Working with Printing Materials" on page 2-8
help.grabcad.com/print/system-requirements.
3 Introducing the 3D Printer
3-6