Safety Considerations; Disposal; Work Environment - Stratasys J4100 User Manual

Stratasys J4100 User Guide
mercury-vapor lights. Exposure to UV radiation causes an increase in viscosity
and, eventually, solidification.

Safety Considerations

Before being cured, resins are hazardous materials. To prevent possible health
hazards, follow these precautions regarding printing materials:
• Do not expose to flames, heat or sparks.
• Prevent contact with skin and eyes.
• Ventilate areas where they are handled.
• Keep them separate from food and drink.
Cured plastic parts, however, are safe. They can be handled and stored without
precautions.
You can find more safety information about resins in:
l
l

Disposal

Dispose of containers of model and support material in accordance with all
applicable laws and regulations.

Work Environment

Extreme heat and humidity conditions can adversely affect the operation of your
J4100 3D printer. Use ventilation or air-conditioning systems, if necessary, to
keep the work area within the following ranges:
• 18°–25° C (64°–77° F)
• 30%–70% relative humidity
DOC-26000 Rev. C
"Safety Guidelines" on page 2-5
"First Aid for Working with Printing Materials" on page 2-8
3 Introducing the 3D Printer
3-5