Table of Contents
Advertisement
Stratasys J850/J835 User Guide
Revision History
Translations of this guide are updated periodically. If you are consuming a translated
version, please check the English version for the latest revision and list of updates.
The following table lists the main changes in each revision of this document.
Revision
Rev. E
Rev. F
Rev. G
Rev. H
DOC-18001 Rev. N
Release Date
Description
December 2020
• About this Guide was updated.
• Additional Resources was added.
• Changing the Printing Material was
• Replacing the Odor filter was updated.
• Improving the Color of X-walls was added.
• Setting the Cartridge Expiration Date was
• Cleaning the Print Head, Roller, and Wiper
• Aligning the Print Heads was updated.
• Minor text and style corrections.
January 2021
• Additional Resources was updated.
• Workstation Requirements was updated.
• Replacing the UV Lamps was updated with
• Photobleaching for Transparent Parts was
• Cleaning the Print Heads, UV Glass, Roller
• Shutting Down the Printer was updated
• Optimizing the Print Heads was updated
• Text, style and format improvements.
February 2021
• Improving the Color of X-walls was updated.
• Text, style and format improvements.
July 2021
• Preparing the Build Tray for Printing on
• Adjusting the Build Tray Height was added.
• The terms model, part, and object were
updated.
added.
was updated with cleaning the UV glass
lenses instruction.
instructions for replacing the UV lamp bulb.
updated.
and Wiper was updated with a note to
empty the waste container before starting
the wizard.
with a note to empty the waste container
before starting the wizard.
with a note to empty the waste container
before starting the wizard.
Fabric was added.
replaced with the term 3D print throughout
the guide.
1 About This Guide
1-3
Advertisement
Table of Contents
