Eden260V User Guide
Using This Guide
This user guide provides instructions for installing, operating and maintaining
Eden260V 3D printing systems. It explains how to use features, and provides
practical examples to guide you as you use the system.
Important: Read the entire Safety chapter before using the system.
The text and figures in this guide are based on the Eden260V 3D printer,
software version 27.5 and Objet Studio software version 9.2.
This guide assumes that—
• all the hardware, software, and network components of your system are
• the operator has a working knowledge of the Windows
For More Information
Visit the
document.This document is also available on the Support Center in other
languages.
If you have any questions or comments about the way information is presented in
this guide, or if you have any suggestions for future editions, please send a
message to c-support@stratasys.com.
Revision History
The following table lists the main changes in each revision of this document.
Revision
Release Date
Rev. F
February 2021
DOC-32020 Rev. F
installed, configured, and operating correctly.
Stratasys Support Center
Description
• About this Guide was updated.
• Additional Resources was added.
• Replacing the Odor Filter was updated.
• Replacing the UV Lamps was updated with
instructions for replacing the UV lamp bulb.
• Photobleaching for Transparent Models was
updated.
• Text, style and format improvements.
to download the latest revision of this
1 About This Guide
®
PC platform.
1-2