Table of Contents
Advertisement
Changing the Display Settings
You can change the density and brightness of the display.
Adjusting the display density
The default setting of the display density is set to "5. "
1
Press
the [Settings] key.
2
Use [
] or [
] to select "Setting, "
and then press the [Enter] key.
S e t ti n g s
P ri n t a d j u s t
S e t ti n g
O t h er s
3
Select "Display density" with [
and press the [Enter] key
Se t ti ng
Print speed
Display density
Backlight(ADPTR)
4
Select the density by [ ] or [ ]
and press the [Enter] key.
Display density
Light
•
A " " mark will be displayed under the current setting.
•
Display Density can be set in the range of 1 (lightest) to 9
(darkest).
5
Press
[Shift] + [Canc] key.
•
The display returns to the character input display.
] or [
]
Dark
Adjusting the Brightness of the
Backlight (Adapter/ Battery)
The backlight brightness can be set for each power source
used, with the default setting being "4" when using the AC
adapter and "1" when using batteries.
1
Press
the [Settings] key.
2
Use [
] or [
] to select "Setting, "
and then press the [Enter] key.
Set t i ng s
P r int a dj us t
S et t ing
O t her s
3
Use [
] or [
] to select "Backlight (ADPTR)" (or
"Backlight (BAT)") and press the [Enter] key.
S e t t ing
Display contrast
Backlight(ADPTR)
Backlight(BAT)
4
Select the density by [ ] or [ ]
and press the [Enter] key.
Backlight(ADPTR)
4
1 2 3
•
A " " mark will be displayed under the current setting.
•
Display Density can be set in the range of 1 (lightest) to 9
(darkest).
5
Press
[Shift] + [Canc] key.
•
The display returns to the character input display.
93
93
Advertisement
Table of Contents
