Specify the Character Spacing
This allows you to surround text with a frame. The following
frame shapes are available, with the default value set to "None. "
SETTING
DETAILS
Narrow
No character
(Default Setting)
spacing
Character spacing
Medium
0.5 mm
Character spacing
Wide
1.0 mm
[Example] Setting the character spacing to "Wide. "
1
Display the page where you want
to change the character spacing.
2
Press
the [Char Space] key.
3
Select "Wide"
using [
] or [
]
Character Space
Narrow
Medium
Wide
4
Press
the [Enter] key.
•
The display returns to the character input display.
•
The character space settings can be checked on the
display.
■
PRINT IMAGE
Pump Room
Pump Room
P u m p R o o m
W
NOTE
•
The character space can be set for each page.
•
When the cut length is specified, the character space may
not be changed.
•
If the alignment is set to "Even Distribution, " the Even
Distribution setting will take priority even if the character
space is set.
•
When the orientation is set to "Vert/Hor char, " the character
space cannot be set.
35
35